Craft Resin makes several resin systems, each built for a different kind of project. Here's how to pick the right one.
Quick comparison
| Product | Best for | Mix ratio | Max layer per pour | Working time | Hard cure | Full mechanical strength |
|---|---|---|---|---|---|---|
| Arts & Crafts | Jewellery, coasters, small moulds, detailed art | 1:1 by volume | 6 mm | ~35 min at 25°C | 24 h | ~21 days |
| Table Top | Bar tops, furniture, protective coatings, tumblers | 1:1 by volume | 3 mm per coat | ~25 min at 25°C | 36–48 h | ~21 days |
| Deep Pour | River tables, deep moulds, flower preservation | 2:1 by volume | 50 mm (less for batches over 5 kg) | ~60 min at 25°C | 48–72 h | ~21 days |
| UV Resin | Small, quick-cure repairs and accents | No mixing | 2–3 mm per pass | Unlimited until exposed to UV light | 60–120 s per face under a UV lamp | — |
| Silicone | Making your own moulds | 1:1 by weight | N/A (mould making) | 20–40 min | 3–5 h at 25°C | — |
"Hard cure" is when the surface feels dry to the touch. Demould times: Arts & Crafts 24 h, Table Top 36 h, Deep Pour 48 h. Full mechanical strength develops over about 21 days. Leave Table Top undisturbed for 72 hours before kitchen use.
Arts & Crafts — for detail and small projects
Low viscosity and a simple 1:1 ratio make this the easiest starting point for beginners, and its clarity and flow into fine detail make it a favourite for jewellery, coasters, and small moulded pieces. Not designed for thick single pours — see Deep Pour for anything beyond 6 mm in one go.
Table Top — for large flat surfaces
Higher viscosity than Arts & Crafts, self-levelling, and designed to flow evenly over large flat areas like bar tops, tables, and furniture — and the right choice for tumblers. Allow the full cure time before use, and note that its full heat resistance rating isn't reached until after a full 21-day cure (see our Heat Resistance article).
Deep Pour — for thickness and volume
Formulated with a slower reaction and lower heat build-up than the other epoxy lines, which is what allows it to be poured much deeper in a single layer. The trade-off is a 2:1 ratio (not 1:1) and a longer cure. Ideal for river tables, deep moulds, and encasing larger objects like flowers in a single thick layer.
UV Resin — for quick, small-scale work
No mixing — UV resin cures in seconds under a UV lamp. Best suited to small accents, quick repairs, and jewellery-scale work where a fast cure matters more than depth.
Silicone — for making your own moulds
Not a casting resin at all — this is a mould-making silicone for anyone who wants to create custom moulds for their epoxy projects rather than buying pre-made ones. Captures fine detail and releases cleanly once cured.
Still not sure?
Tell our support team what you're making — the size, whether it needs to be a single deep pour or a thin coating, and how much detail you need to capture — and we'll point you to the right product.
Related articles
- Mixing Ratio — How to Measure Resin and Hardener Correctly
- Deep Pour — Maximum Depth, Layering, and Cooling Time
- What's Included in the Kit?
What went wrong? (Optional)